DIGITAL TIMER SETUP
MODEL: TUE-20 [VET2-2]
Follow the steps in this video to set your digital light timer that comes with:
MUSHROOM KITS:
FAME Kit v1.5 – v1.7.5
MycroGROW™ Auto v1.0 – v1.5
UNIVERSAL & AUTOMATED KITS:
Fanning Kit v1.0+
Intake & Exhaust Kit v1.0+
MycoMIST™ Humidity Kit v1.0+
This video shows us setting the time for the FAME Kit Exhaust System. Follow Recommended Settings for your product as outlined below!
Psilly Note: The humidifier runs directly after the fan so that the system stays humid & doesn’t dry out!
Psilly Note:
Lighting Timer: You can set your times to whatever time you would like, just make sure the timer is set to run your light for a minimum of 8HRS a day and up to a maximum of 16HRS a day.
Most strains of mushrooms are able to fruit with minimal lighting. Mushrooms, unlike plants, do not use light for growth in a traditional sense, and in turn use it only for triggering the fruiting body or pinning; ie. the mushrooms.
Click the pause button or space bar to pause video on the text screens if video is too fast
Troubleshooting Tips:
- If the timer does not display any numbers when it arrives, plug it into a power receptacle for at least 10 minutes, then you may unplug it to set your clock and timers. If after 10 minutes and it still doesn’t display, refer to #6 to RESET timer.
- If an “R” is displayed on the right side of your clock above the seconds, press the RND button once to shut Random Mode off.
- If AM/PM are not displayed on the top left corner, press the SET & CD buttons once simultaneously.
- If your timer isn’t coming on during the specified “ON” time, press the MODE button until the timer displays “ON” and your device will turn on, press MODE again to display “AUTO” and the timer will take over.
- If your device is running and should be “OFF” then you will want to press the MODE button until the timer displays “OFF” and the device is off. Then press MODE once more to allow the timer to take over the functions.
- If the timer has digits that look all funky, like it’s short circuited or something to that nature, use a ballpoint pen or a paperclip to press and hold the RESET button in the hole directly on the bottom center of the timer between the CD & RND buttons. Once pressed long enough you may hear a click and the timer will reset. You will need to fully reprogram the timer at this point.
If the timer needs reset more than 3 times in a single month, please contact customer support at the bottom of this page with your order number and we will get you a replacement.
