DIGITAL TIMER SETUP
MODEL: LTS-T21 [0864292]
Follow the steps in this video to set your digital light timer that comes with:
Psilly Note:
Lighting Timer: You can set your times to whatever time you would like, just make sure the timer is set to run your light for a minimum of 8HRS a day and up to a maximum of 16HRS a day.
Most strains of mushrooms are able to fruit with minimal lighting. Mushrooms, unlike plants, do not use light for growth in a traditional sense, and in turn use it only for triggering the fruiting body or pinning; ie. the mushrooms.
Click the pause button or space bar to pause video on the text screens if video is too fast
Troubleshooting Tips:
- If the timer does not display any numbers when it arrives, plug it into a power receptacle for 10 – 20 minutes, then you may unplug it to set your clock and timers. If after 10 minutes and it still doesn’t display anything, jump to tip #4 in this list.
- If your light isn’t coming on during the specified “ON” time, press [MODE] until the timer displays “ON” and your device turns on, then press [MODE] again to display “TIME” and the timer will take over.
- If your device is running but should be “OFF” then you will want to press [MODE] until the timer displays “OFF” and the device shuts off. Then press [MODE] once more to [TIME] to allow the timer to take over the functions.
- If the timer has digits that look all funky, like it’s short circuited or something to that nature, or is still blank, use a ballpoint pen or a paperclip to press and hold the RESET button in the hole directly on the bottom center of the timer between [HOUR] & [MIN]. Once pressed the timer will reset and should display digits properly. If after pressing RESET nothing happens, please contact customer support using the contact form below!
